Vacuum Hose Elbow 45 and 90 deg


  • Fits standard 2-1/2″ hose cuffs

  • Available 45 or 90 degree

  • 90 deg elbow is Standard Sch 40 PVC

  • Hose Cuffs are PETG Plastic.

  • Works well on exit or entrance vacuum hose cuffs

Clear selection


This shop Vacuum Hose Elbow is for 2-1/2″ hose to eliminate large loops.

This unique shop vacuum hose adapter is for standard 2-1/2 inch hose cuffs – male end to a female inlet adapter.   This fitting in available in 45 or 90 degrees.  It provides 2 inch schedule 40 PVC pipe at the bend where wear occurs.   The PETG plastic adapter end fittings work extremely well in any 2-1/2″ shop vacuum inlet adapter.

In addition, this fitting is designed specifically to work with the Cat 6 Tools’ vacuum filter buckets and drums where short hoses between bucket and vacuum make for more efficient systems. Furthermore, two of these fittings will mate together to form an “S” joint.  Lastly, these fittings will also adapt to a bucket side tangential inlet so that hose from the ground can easily adapt to the bucket inlet.   Because this reduces large hose loops, it provides more stability to the bucket. This vacuum hose elbow is specifically designed to fit inlets and outlets of Cat 5 Tools’ Cyclonic Separators and Filter Separators.

This elbow is available in 45 and 90 degrees

90 degree elbow adapter male and female ends for 2-1/2″ shop vacuum hoses
45 deg elbow male and female ends. Fits standard shop vacuum hose adapters

As a result of good engineering practices these adapters work with standard 2-1/2″ Shop Vac hose connectors.

These products work in any shop vacuum inlet or outlet adapter such as found on Ridgid Vacuums with 2-1/2″ hoses.

90 degree ada[ter for 2-1/2″ vacuum hose by Cat 6 Tools


Cat 6 Tools’ 2-1/2″ vacuum hose elbow adapter attached to filter drum


How the use of Cat 6 Tools 45 and 90 deg elbows reduce large vacuum hose loops.
2-1/2″ vacuum hose elbow attached to 8 gallon filter drum. This adapter works with standard 2-1/2″ shop vacuum hose.


In addition, all Cat 6 Tool hose cuffs connect to these elbows.

Commercial Grade Low Loss Vacuum Hose 2-1/2″ OD, 2″ ID

Other links you might enjoy:

Cat 6 Tools is proud to attach this sticker to tools that we modify, fabricate and assemble in the USA.

Products made by Cat 6 Tools, LLC that are made, assembled, modified in the USA

We’re here to help

Contact us at:

Cat 6 Tools, LLC
Cat 6 Tools, LLC
Henderson, NV


Additional information

Weight 1 lbs
Dimensions 9 × 6 × 4 in
Hose Adapter

90 Degree, 45 Degree


There are no reviews yet.

Be the first to review “Vacuum Hose Elbow 45 and 90 deg”