Low Loss Vacuum Hose 2-1/2 inch Soft Cuffs


  • 8 foot hose improves flow rate over standard Shop Vac Hose by 20%

  • Vacuum Hose 4′, 8′, 10′, 12′, 15′, 20′ 25′,30′,35′,40′,50′ lengths

  • Easy thread on Soft Hose Cuffs – Left Hand Threads

  • Hose Cuffs Slip Fit on 2″ Metal Tubing

  • Hose Cuffs work with Holey-Moley Diggers

  • The Hose Cuffs work with Standard 2-1/2″ Shop Vacuum Inlets

  • 2-1/2″ OD, 2″ ID

  • Commercial Grade

  • Won’t Kink like Shop Vacuum Hose

  • Smooth Low Loss Interior Bore

  • Crush Resistant.

  • Bright Orange for areas with high traffic.

  • UV / Fade Resistant

  • 8  Feet Recommended for Shop Vac to Diggers

  • 4 Feet Recommended Shop Vac to Separator

call for more information

Got a question?  Call us at 702-533-4363

Clear selection


Low Loss Vacuum Hose 2-1/2 inch Soft

Our Commercial Grade Low Loss Vacuum Hose with 2-1/2″ hard cuffs is made specifically for Holey-Moley Diggers using a shop vac. The hose comes in lengths of 4 feet, 8 feet or 10 feet.  As a result, this minimizes flow losses.  In addition, the 8 foot lengths are ideal for our Holey Moley Post Hole Diggers to connect direct to shop vacuums or to pre-filter buckets.

Ten foot lengths provide a few feet more length for digging flexibility.  Compared to standard shop hose, this crush proof hose has 20% better flow rate. Furthermore this hose will not kink while using with post hole diggers.  As a result, this 8 foot long hose is ideally suited for diggers to minimize flow losses while also being long enough to provide adequate flexibility while digging. The 2-1/2″ OD hose has a smooth 2″ ID bore.

Includes Custom 2-1/2″ Hard Hose Cuffs

This Low Loss Vacuum Hose 2-1/2″  comes with two Hose Cuffs custom made for Holey Moley Post Hole Diggers  Besides being tough, the Hose Cuffs slide over the 2-inch digger inlet with a slip fit allowing for smooth rotation of the digger without getting the back and forth slap of the hose that is common with shop vac hose adapters.  As a result of the slip fit, there is very low air seepage at the slip joint. Low leakage, ensures high air flow all the way to the shop vac. These custom Hose Cuffs fit all standard 2-1/2″ inlets.

Transport Rates of One Pound a Second Through 8 feet of hose

Because of excellent engineering, this hose is fabricated with a smooth interior bore.   As a result, this hose achieves 20% better flow performance over standard 2-1/2″ Shop Vac hose. Tests done with 8 feet of this hose with a Ridgid WD19560 (203 CFM, 45″ H2O) pulled over one pound a second of 1″ gravel into the vacuum.  This is an incredible performance achievement for that vacuum.

Quality Construction

The Commercial Grade Low Loss Vacuum Hose is made from co-polymer materials with a two-part helically wound construction, these hoses are far superior to others available on the market. Besides having a bright orange color for high traffic areas, the hoses are UV/Fade Resistant and will a maintain their sharp appearance for a long time.

2-1/2″ commercial vacuum Hose (2″ ID) w/flexible threaded hose cuffs.


Non-Kink, low loss, commercial grade vacuum hose is ideal for Holey-Moley Post Hole Diggers.















2-1/2"-hose-cuff-has-2"-ID-slip-fit-for 2"-metal-tubing
The rigid custom hose custom hose cuff fits 2-1/2″ OD vacuum hose and has a slip fit on the other end for 2″ metal tubing, available for vacuum diggers.













Other links you may enjoy:

We’re here to help

Cat 6 Tools, LLC
Cat 6 Tools, LLC
Henderson, NV


For more information give us a call, text,  or send us an Email.

Additional information

Weight 3.0 lbs
Dimensions 16 × 16 × 12 in
Vacuum Hose with Hard Cuffs

4 ft, 8 ft, 10 ft, 12 ft, 15 ft, 20 ft, 25 ft, 30 ft, 35 ft, 40 ft, 50 ft


There are no reviews yet.

Be the first to review “Low Loss Vacuum Hose 2-1/2 inch Soft Cuffs”