Reamer Replacement Blades
Holey-Moley Reamer Replacement Blades are available for 8-inch (EZ Reamer) and our 10-inch, and 12-inch Reamers. These beautiful carbon steel blades have a quality zinc plating. In addition, each replacement blade comes with a a full set of replacement hardware. Therefore, existing bolts can be taken out, or ground off with a grinder. Just throw the old blade away. The Holey-Moley Reamer Replacement Blade attaches directly to Post Hole Reamer Head. This requires just a few bolts and screws. As a result, just remove the existing blade, insert the new blade, and re-attache it with the new hardware. Finally, the replacement time is less than 15 minutes.
For the 8-inch EZ Reamer, there are 4 saw blades and 4 scraper blades. Each is held on with (3) 8-32 button head screws. Total time to replace the blades is approximately 30 minutes.
As a result of quality engineering, the teeth on these carbon steel blades can be made sharp again using a common metal file or Dremel Tool. Because the blades are tough carbon steel they will not snap or break. Therefore, they will bend when hitting stones while digging. The blades are easy to reset with a small Crescent wrench. As a result of their toughness, these blades will last a long time.
Both the 10-inch and the 12-inch replacement blades fit on the same 6-inch pilot tube. So if you’d like the least expensive option to have both sizes, just purchase a 10-inch reamer and a 12″ replacement blade.
Reamer Replacement Blades are Easy to Install
The blade is easy to replace with a 7/32 Allen Wrench and a 1/4″ socket. In addition, the bolt holes are the right size for easy alignment. As a result, the excellent design, makes this blade a snap to install.
Our manufacturer and distributor is Keene Engineering well known for their high quality Gold Dredging equipment for over 70 years.
Made in the USA
Cat 6 Tools is proud to manufacture most if its products in the USA.