Holey-Moley Reamer Replacement Blades 8″ 10″ 12″


Replacement Blades at a Reasonable Price
10″, 12″ replacement blades
  • Designed to install in less than 15 minutes
  • Made of high quality carbon steel
  • Beautifully finished with a high quality zinc plating
  • Blade teeth are easy to resharpen
Got a question?  Give us a call 702-533-4363


Use drop down to choose blade size
Clear selection


Reamer Replacement Blades

Holey-Moley Reamer Replacement Blades are available for 8-inch (EZ Reamer) and our 10-inch, and 12-inch Reamers. These beautiful carbon steel blades have a quality zinc plating. In addition, each replacement blade comes with a a full set of replacement hardware.  Therefore, existing bolts can be taken out, or ground off with a grinder.  Just throw the old blade away. The Holey-Moley Reamer Replacement Blade attaches directly to Post Hole Reamer HeadThis requires just a few bolts and screws. As a result, just remove the existing blade, insert the new blade, and re-attache it with the new hardware.  Finally, the replacement time is less than 15 minutes.

For the Holey-Moley 8-inch EZ Reamer, there are 4 saw blades and 4 scraper blades.  Each is held on with (3) 8-32 button head screws.  Total time to replace the blades is approximately 30 minutes.

There are 4 saw blades and 4 scraper blades that come in a blade kit. Kit includes screws and nuts.



As a result of quality engineering, the teeth on these carbon steel blades can be made sharp again using a common metal file or Dremel Tool.  Because the blades are tough carbon steel they will not snap or break. Therefore, they will bend when hitting stones while digging.  The blades are easy to reset with a small Crescent wrench. As a result of their toughness, these blades will last a long time.

Both the 10-inch and the 12-inch replacement blades fit on the same 6-inch pilot tube.  So if you’d like the least expensive option to have both sizes, just purchase a 10-inch reamer and a 12″ replacement blade.

Large Diameter Replacement Blade

Reamer Replacement Blades are Easy to Install

The blade is easy to replace with a 7/32 Allen Wrench and a 1/4″ socket.  In addition, the bolt holes are the right size for easy alignment.   As a result, the excellent design, makes this blade a snap to install.

Other links you may enjoy:

Quality Manufacturing

Our manufacturer and distributor is Keene Engineering well known for their high quality Gold Dredging equipment for over 70 years.

Made in the USA

Cat 6 Tools is proud to manufacture most if its products in the USA.

Cat 6 Tools, attaches this sticker to products that are patented and made in the USA.

We’re here to help

Contact us at:

Cat 6 Tools, LLC
Cat 6 Tools, LLC
Henderson, NV

Additional information

Weight N/A
Dimensions N/A
Reamer Replacement Blades

8-inch, 10-inch, 12-inch


There are no reviews yet.

Be the first to review “Holey-Moley Reamer Replacement Blades 8″ 10″ 12″”