Description

Fence Post Hole Reamer 12 inch

The Post Hole Reamer enlarges 6-inch diameter holes to 12-inches.  Other diameters are available – 10 inch, and 8 inch.  In addition, the all steel reamer has a movable cutting blade.  As a result, in the up position, the 6-inch pilot tube is exposed for starting holes.  Consequently the reamer stays perfectly aligned.  After starting a hole, it’s easy to move the blade to the down position.  As a result, In the down position, the blade will cut a square bottom in the hole.

This reamer works with the same Shop Vacuum as the Holey Moley Diggers.   The vacuum removes cuttings from the bottom of the hole while reaming.  This significantly reduces the time on cleaning up holes.    In addition, the clean holes with uniform sides reduce the amount of dirt removal required for each job.

Fence Post Hole Reamer 12 inch Assembly

The Post Hole Reamer Assembly 12 inch includes the digger head, lower vacuum tube, the standard upper vacuum tube and the handle assembly.

 

Fence Post Hole Reamer 12 inch (Quick Change Head)

The 12 inch Diameter Post Hole Reamer Quick Change Head includes the digger head and lower vacuum tube.  As result of engineering design, the Quick Change Head works with the 6-inch Post Hole Digger.  Consequently, there is no need to buy the reamer with a handle and upper vacuum tube if you own or are purchasing a 6″ post hole digger.     Hence, Quick change heads same you money that you can put into the diversity of digger heads available.  We offer a number of Post Hole Digger Quick Change Heads.

Fence Post Hole Reamer 12 inch Uses

There are many uses for this reamer.  The holes are suitable for large gate posts such as 4×6 posts, steel pipe posts, telephone poles, and concrete tubes.   In addition, if you are putting in a pole barn, this is the perfect tool.  As a result, this reamer works side-by-side with the 6-inch Holey Moley Post Hole Digger to enlarge deep holes for tall poles.

Easy digger head change out

The Quick Change Digger Heads are easily changed out with other digger heads with only two bolts.

Concrete Tubes

The diameters of these unique post hole reamers are 1/4″ larger than the nominal diameter. As a result, the  holes ideal for concrete form tubes.  As a result, concrete form tubes have many uses including:

• Footings
• Piers
• Deck supports
• Fence posts
• Mailbox posts/bases

Further information on Concrete Form Tubes can be found below:

• Quickrete Quick-tube Building Forms available in 8″, 10″ and 12″ sizes
• Sonotube Concrete Forms available in 8″, 10″ and 12″sizes
• Sakrete Form Tubes also available in 8″, 10″ and 12″ sizes

Need a smaller diameter?

Check out our Fence Post Hole Reamer 8 inch and our Fence Post Hole Reamer 10 inch

Other links you may enjoy:

70 years of Manufacturing Experience

 Keene Engineering of Chatsworth, California manufacturers the Holey Moley DIggers and Reamers.  Keene Engineering in business now for over 70 years makes quality dredging and mining equipment.   All parts are backed by a 30 day replacement and 1 years manufacturing parts defect warranty.

Made in the USA

Cat 6 Tools is proud to manufacture most if its products in the USA.

We’re here to help

Contact us at: