Cyclonic Separator Plastic Bucket Gamma Lid


  • Ready to use out of the box
  • Includes Laser cut metal plate for durability
  • Cyclonic Deflectors and Plate are bolted to a modified Gamma Lid
  • Includes Gamma Lid bucket adapter ring 
  • Hard plastic deflectors.  Use either hole for inlet or outlet. 
  • Made for standard 2-1/2″ shop vacuum hose adapters.
  • Made for wet/dry operation
  • Will handle gravel up to 1-1/2″


6 in stock (can be backordered)


This Cyclonic Separator Plastic Bucket Gamma Lid is the most durable cyclonic separator lid available. Fits any 5 or 7 gal bucket.

Cat 6 Tools is now offering a new Cyclonic Separator Plastic Bucket Lid one of the best industrial vacuum separator products made. This lid has a heavy metal lid adapter plate attached to an easily removable Gamma Lid that attaches to any 5 or 7 gallon plastic bucket.  As a result, this lid is made to handle nasty stuff.  Consequently, when the bucket is full just remove the lid, and seal with a standard Gamma Lid for sealing in the bad stuff for easy carry away. In addition, when the bucket wears out, just replace with any standard 5 or 7 gallon bucket.  Save your vac, separate it first.   Furthermore, this bucket works well with any Holey Moley Post Hole Digger.

You get what you pay for

The old saying, you get what you pay for applies to this Industrial  Grade Cyclonic Separator Plastic Bucket Lid. As a result of engineering design, this vacuum separator bucket Lid is tough and durable and and outperforms the inexpensive kind made for saw dust.  The hose deflectors are made for wet or dry nasty stuff. For instance, they will handle anything from 1-1/2 inch gravel to raw sewage.    Consequently, this is the most rugged cyclonic lid available.  In addition, the deflector hose adapters are universal, so you can use either for inlet or outlet.  Also this lid fits any 5 or 7 gallon bucket that accepts standard Gamma Lids.

Replaceable Parts

When the bucket wears out, it is replaceable with any standard 5 or 7 gallon bucket. The key part of this lid is the 1/8″ laser cut metal plate and the deflector adapters. The plate is coated for durability where it counts and will last a lifetime.  The deflectors are universal and are easy to replace with just three screws.

The Cat 6 Tools Cyclonic Separator Lid


The bottom of the cyclonic separator plate and deflectors attached to modified gamma lid

Fits standard 5 or 7 gallon plastic buckets

The cyclonic separator bucket lid fits most 5 and 7 gallon plastic buckets that are suitable for Gamma Lids.  Get he Cat 6 Tools 7 Gallon Cyclonic Separator Plastic Bucket shown below. Comes with hoses.

7 Gallon Cyclonic Plastic Bucket. Screw on Gamma Lid. Inlet/Outlet identical fits standard 2-1/2″ shop vac hose or 2″ ID Industrial Hose.

The Flood Buddy

When your dwellings are flooded and clean up begins, use the Flood Buddy – Commercial Grade Cyclonic Vacuum Bucket to do the dirty work.   In other words, keep the muck out of your shop vacuum, use this Cyclonic Vacuum Bucket as a pre-filter.  It removes 98% of all the water, mud, dirt, or dust allowing easy cleaning of your shop vacuum. In addition, this Cyclonic Bucket was tested with the Ridgid WD19560 vacuum and the results were outstanding.  The Commercial Grade Cyclonic Vacuum Bucket will work with any vacuum, however the higher the suction rate and flow rate the better.  Just make sure the inlet uses a 2-1/2″ hose.

Save your back

Shop vacuums are extremely difficult to empty of heavy debris.  The 7 gallon buck and handle make lifting easy and dumping just as easy.   In addition, cleaning buckets is a lot easier than cleaning out shop vacuums.  They are easy to dump and easy to wash out.

Cyclonic Separator Filter 7 gallon Plastic Bucket with Ridgid WD19560 Vacuum













It works with all 2-1/2″ shop vacuum hoses

This Bucket lid has two deflector connectors, one for hooking to your shop vacuum using the 4 foot hose that comes with the unit, and one for your vacuum hose.  The deflector plate attaches to a modified Gamma Lid.   This lid will screw onto any 5 or 7 gallon bucket fitted with a gamma adapter.  Everything is replaceable.

Cleaning up hazardous materials

Save your back and your vac when sucking up really bad stuff.   Because it works wet or dry, this Industrial Grade Cyclonic Separator Bucket Lid works in almost any environment where a vacuum separator is needed.  As a result of heavy duty construction, when your bucket is full, remove the deflector lid and replace with a solid Gamma Lid available at most hardware stores or get it from Cat 6 Tools.  This lid seals in the nasty stuff for easy transport and disposal.

Other links you may enjoy:

Made in the USA

Cat 6 Tools is proud to attach this sticker to tools that we modify, fabricate and assemble in the USA.

Products made by Cat 6 Tools, LLC that are made, assembled, modified in the USA

We’re here to help

Contact us at:

Cat 6 Tools, LLC
Cat 6 Tools, LLC
Henderson, NV

Additional information

Weight 3 lbs
Dimensions 14 × 14 × 6 in

1 review for Cyclonic Separator Plastic Bucket Gamma Lid

  1. Titus Nelson, PE

    This is a fantastic product. It is easy to use, I just snapped it on my own 5 gallon bucket an it was ready to go. I like the gamma lid as it has a nice “O-rng” seal. The inlet and outlet are the same so no worry which one you attach the hose to. Cat 6 Tools has excellent customer service. Always nice to have a real person answer the phone.

Add a review