Cyclonic Separator Plastic Bucket Lid with Lock Ring Clamp

$109.00

  • 11.75 inch Anodized Aluminum Plate

  • 2 PETG Deflectors

  • 1 Locking Ring Clamp

  • Fits standard 5 and 7 gallon Plastic Buckets.

Description

This Cyclonic Separator Plastic Bucket Lid with Lock Ring Clamp.

Cat 6 Tools is now offering a new Commercial Grade Cyclonic Separator Steel Pail Lid.  This modified steel pail lid will fit standard 5 or 7 gallon steel pails.  As a result, this lid is made to handle nasty stuff.  Consequently, when the bucket is full just remove the lid, and seal with a standard steel pail lid for sealing in the bad stuff for easy carry away. In addition, when the pail wears out, just replace with any standard 5 or 7 gallon steel pail.  Furthermore, this steel pail cyclonic separator lid works with standard shop vacuums with 2-1/2″ hoses.

You get what you pay for

The old saying, you get what you pay for applies to this Commercial Grade Cyclonic Separator Plastic Bucket Lid with Lock Ring Clamp. As a result of engineering design, this anodized aluminum lid is tough and durable and outperforms the inexpensive plastic kind made for saw dust.  The hose deflectors are made for wet or dry nasty stuff. For instance, they will handle anything from 1-1/2 inch gravel to raw sewage.    Consequently, this is the one of the most rugged cyclonic lids available.  In addition, the deflector hose adapters are universal, so you can use either for inlet or outlet.

Fits 5 and 7 Gallon Plastic Buckets.

This anodized aluminum lid fits standard 5 and 7 gallon plastic buckets.

 

Replaceable Parts

All the hardware on this cyclonic lid are replaceable. The aluminum lid with a durable rubber gasket attached.  The deflectors are universal and are easy to replace with just three screws.

5-gal-cyclonic-separator-steel pail-lid-top
Cat 6 Tools 5 gallon steel pail cyclonic separator lid top showing inlet and outlet ports. Both ports are usable as inlet or outlet.

 

rieke-lever-lock-ring-pail-clamp
UN Rieke Lever Lock Ring and Clip

 

Made in the USA

Cat 6 Tools is proud to attach this sticker to tools that we modify, fabricate and assemble in the USA.

cat-6-tools-patent-pending-made-in-usa
Products made by Cat 6 Tools, LLC that are made, assembled, modified in the USA

We’re here to help

Contact us at:

Cat 6 Tools, LLC
Cat 6 Tools, LLC
Henderson, NV
info@cat6tools.com
702-533-4363

Additional information

Weight 3 lbs
Dimensions 12 × 12 × 6 in