Cyclonic Separator Plastic Bucket -7 Gal – Ring Clamp


  • 7 Gallon Plastic Bucket

  • Anodized Aluminum Plate 

  • Comes with two hoses 4 feet and 8 feet

  • Lever Lock Ring Clamp for easy opening

Call if you have any questions



This Cyclonic Separator Plastic Bucket – 7 Gal – Ring Clamp leaves your shop vac in a dry space while the Separator sucks up the bad stuff.

Cat 6 Tools is now offering a new Commercial Grade Cyclonic Separator Plastic Bucket with a Lock Ring Clamp. Put this bucket in line with your shop vacuum.  It will significantly reduce the carry over into your shop vacuum which extends the vacuum filter life. Furthermore, this 7 gallon bucket is lightweight and easy to move around when full. When full, attach a standard plastic bucket lid available at most hardware stores and seal the bad stuff in for easy, spill free, transport.

This Cyclonic Separator Bucket has a durable, aluminum lid that attaches to any 5 or 7 gallon bucket.  As a result, this bucket will handle nasty stuff.   In addition, when the bucket wears out, just replace with any standard 5 or 7 gallon bucket.  Furthermore, this bucket works well with any Holey Moley Post Hole Digger.  This Cyclonic Separator 7 Gallon Plastic Bucket with Lock Ring Clamp comes complete with two hoses and is ready to go.  Don’t miss out on this vacuum separator.


We use High Quality Components in the Cyclonic Separator Plastic Bucket

Everything in this system is of the highest quality available.   The 100 mil bucket wall thickness allows this bucket to handle vacuums as high as 70 inches of water, well over that pulled most shop vacuums.  The aluminum plate anodized for long life.

The old saying, you get what you pay for applies to this Commercial Grade Cyclonic Separator 7 Gallon Plastic Bucket.  Therefore, this bucket Lid is tough and durable and is not like the inexpensive kind made for saw dust.  This vacuum bucket is made for wet or dry materials. For instance, it will handle anything from 1-1/2 inch gravel to raw sewage.    Consequently, this is the most rugged cyclonic separator bucket available.   It is made to last a long time. In addition, it is a “System” that is highly efficient.

Easy to Replace Bucket.

In addition,  When the bucket wears out, it is replaceable with any standard 5 or 7 gallon bucket. The key component of this lid is the laser cut aluminum plate with deflector adapters and Lock Ring Clamp.  Both hose adapters are specifically made to accept Cat 6 Tools Low Loss Hose Hose Cuffs that screw on to the hose.   Not to worry, these lid adapters will also accept any standard 2-1/2′ shop vacuum hose adapters.  These vacuum separators are the most versatile in the industry.


Cyclonic Separator Aluminum Bucket Lid with Lock Ring Clamp


The attaching ring clamp allows for 360 rotation of the Cyclonic Separator Plastic Bucket Lid.

For a tight seal a unique UN Rated Lock Ring Clamp provides the clamping power needed to seal the plate gasket against the rim of the plastic bucket for a strong vacuum seal.   The chemical resistant gasket stands up to many liquids that might might come into contact with the tight bucket gasket seal.   What sets this ring clamp and aluminum plate attachment above other buckets leak tight seal and easy to remove Ring Clamp.

The Cat 6 Tools Cyclonic Separator 7 Gallon Plastic Bucket design allows for fast easy lid opening with a quick release Lever Lock Ring Clamp.  Because of the safety catch,  the lid won’t open until you need it.  Consequently, open this lid as many times as you need, it is quick and easy.


UN Rieke Lever Lock Ring Clamp

Works perfectly with any shop vacuum with 2-1/2 inch vacuum hose cuffs. The is our most well suited vacuum separator for taking the load off of a shop vacuum, as well as providing the ability to use a standard bucket snap on lid to seal in contents when you need to.

Shop vacuum performance increased with a non-filter cyclonic bucket and a low loss commercial vacuum hose.


The Cyclonic Separator 7 Gallon Plastic Bucket comes “Ready to Go” with two hoses.

This highly efficient Cyclonic Separator will increase the performance of your shop vacuum by 20%.  That is the reason we haven’t skimped on hoses with this vacuum separator.   The 4 foot hose is just the right length to hook to your shop vacuum. Consequently, this low loss vacuum hose has a 20% better flow rate and is a direct replacement for standard 2-1/2″ OD shop vacuum hose.

The 8 foot hose provides just the right length to keep efficiency up but still provide enough flexibility to get the job done.  Furthermore, the vacuum hose is the best available providing low flow losses making this vacuum bucket the best available on the market.

4 feet of 2-inch low loss commercial grade vacuum hose with hard hose cuffs. Fits any Shop Vacuum 2-1/2″ hose fitting. 2″ ID smooth bore, 2-1/2″ OD


8 Feet of Commercial Grade Low Loss Vacuum Hose 2-1/2″ OD, 2″ ID will attach to the Cyclonic Separator and to most shop vacuum attachments.


Better than the “Flood Buddy” the Cyclonic Separator 7 Gallon Plastic Bucket

What sets this separator apart from the Flood Buddy, is the Lever Lock Ring Clamp that is easier to install and remove compared to the Gamma Lid.  However, like the Flood Buddy, when it’s time to clean up flood debris, the Cyclonic Separator 7 Gallon Plastic Bucket does the dirty work.   In other words, keep the muck out of your shop vacuum, use this Vacuum Separator Bucket as a pre-filter.  It removes 98% of all the water, mud, dirt, or dust allowing easy cleaning of your shop vacuum.

In addition, this Cyclonic Bucket was tested with the Ridgid WD19560 vacuum and the results were outstanding.  The Cyclonic Separator Vacuum Bucket will work with any vacuum, however the higher the suction rate and flow rate the better.  Just make sure the inlet uses a 2-1/2″ hose. Below you can see the Cyclonic Separator ssucking up mud, clay and water while keeping the Ridgid Shop Vacuum dry and clean.

The 7 Gallon Cyclonic Separator made for nasty stuff in action with mud slurry

Watch the video, learn more about the Cyclonic Separator “Flood Buckets”, the best vacuum separator available.

Click this link to see the video 7 Gallon Cyclonic Separator Plastic Bucket  New Release

or click on the photo below.

Cyclonic Separator Buckets 5 and 7 gallons – “Flood Buckets”

Save your vac and your back.

Shop vacuums are extremely difficult to empty when filled with heavy debris.  The 7 gallon bucket and handle make lifting easy and dumping just as easy.   In addition, cleaning buckets is a lot easier than cleaning out shop vacuums.  These vacuum separator buckets are easy to to clean by just using a garden hose to wash out.

Low Loss Vacuum Hose

Cat 6 Tools carries Low Loss Vacuum Hose in various lengths.  Want something longer please give us a call.

Other links you may enjoy:

Made in the USA

Cat 6 Tools is proud to manufacture most if its products in the USA.

Products made by Cat 6 Tools, LLC that are made in the USA and Patent Pending

We’re here to help

Contact us at:

Cat 6 Tools, LLC
Cat 6 Tools, LLC
Henderson, NV

Additional information

Weight 26 lbs
Dimensions 24 × 18 × 18 in


There are no reviews yet.

Be the first to review “Cyclonic Separator Plastic Bucket -7 Gal – Ring Clamp”