Core Digger Replacement Blades
Core Digger Replacement Blades are available for 4-inch, 5-inch, and 6-inch Core Diggers. These beautiful blades are made of high quality carbon steel and are zinc plated. In addition, each replacement blade comes with a a full set of replacement hardware. Therefore, existing screw heads can be unscrewed, or ground off with a grinder. Just throw the old blade away. The Core Digger Replacement Blade attaches directly to Post Hole Core Digger . This requires just a few bolts and screws. As a result, just remove the existing blade, insert the new blade, and re-attache it with the new hardware. Finally, the replacement time is less than 15 minutes.
As a result of quality engineering, the teeth on these carbon steel blades can be resharpened using a common metal file. Because the blades are tough carbon steel they will not snap or break. Therefore, they will bend when hitting stones while digging. The blades are easy to reset with a small Crescent wrench. As a result of their toughness, these blades will last a long time.
Core Digger Replacement Blades are Easy to Install
The blade is easy to replace with a 7/32 Allen Wrench and a 1/4″ socket. Each blade has an index tab for proper orientation. In addition, the bolt holes are the right size for easy alignment. As a result, the excellent design, makes this blade a snap to install.
Our manufacturer and distributor is Keene Engineering well known for their high quality Gold Dredging equipment for over 70 years.
Made in the USA
Cat 6 Tools is proud to manufacture most if its products in the USA.