Commercial Grade Cyclonic Vacuum Bucket

$215.00

  • Ready to use out of the box
  • Includes 7 gallon bucket, Cyclonic Lid, and 4′ of 2″ low loss hose
  • Includes Laser cut metal plate for durability bolted to modified Gamma Lid
  • Includes Gamma Lid bucket adapter on 7 gallon bucket. 
  • Hard plastic deflectors.  Use either hole for inlet or outlet. 
  • Made for standard 2-1/2″ shop vacuum hose adapters.
  • Made for wet/dry and dry gravel up to 1-1/2″

 

2 in stock (can be backordered)

Description

Commercial Grade Cyclonic Vacuum Bucket

Cat 6 Tools is now offering a new Commercial Grade Cyclonic Vacuum Bucket.  This Bucket has a heavy metal lid adapter plate attached to an easily removable Gamma Lid that attaches to any 5 or 7 gallon bucket.  As a result, this bucket is made to handle nasty stuff.  Consequently, when the bucket is full just remove the lid, and seal with a standard Gamma Lid for sealing in the bad stuff for easy carry away. In addition, when the bucket wears out, just replace with any standard 5 or 7 gallon bucket.  Furthermore, this bucket works well with any Holey Moley Post Hole Digger.

The old saying, you get what you pay for applies to this Commercial Grade Cyclonic Vacuum Bucket. Therefore, this bucket Lid is tough and durable and is not the the inexpensive kind made for just saw dust.  This inlet is made for wet or dry nasty stuff. For instance, it will handle anything from 1-1/2 inch gravel to raw sewage.    Consequently, this is the most rugged cyclonic lid available.   It will last a long time and it fits any 5 or 7 gallon bucket. When the bucket wears out, it is replaceable with any standard 5 or 7 gallon bucket. The key part of this lid is the 1/8″ laser cut metal plate and the deflector adapters. The plate is coated for durability where it counts.

 

cyclonic-lid-bucket-wet-dry
7 Gallon Bucket with Cyclonic Lid. Screw on Lid. Inlet/Outlet identical fits standard 2-1/2″ shop vac hose or 2″ ID Industrial Hose.

 

 

 

 

 

 

 

 

 

 

 

 

 

The Flood Buddy

When your dwellings are flooded and clean up begins, use the Flood Buddy – Commercial Grade Cyclonic Vacuum Bucket to do the dirty work.   In other words, keep the muck out of your shop vacuum, use this Cyclonic Vacuum Bucket as a pre-filter.  It removes 98% of all the water, mud, dirt, or dust allowing easy cleaning of your shop vacuum. In addition, this Cyclonic Bucket was tested with the Ridgid WD19560 vacuum and the results were outstanding.  The Commercial Grade Cyclonic Vacuum Bucket will work any vacuum, however the higher the suction rate and flow rate the better.  Just make sure the inlet uses a 2-1/2″ hose.

Save your back

Shop vacuums are extremely difficult to empty of heavy debris.  The 7 gallon buck and handle make lifting easy and dumping just as easy.   In addition, cleaning buckets is a lot easier than cleaning out shop vacuums.  They are easy to dump and easy to wash out.

 

 

 

 

 

 

 

 

 

 

 

 

It works with all 2-1/2″ shop vacuum hoses

This Bucket lid has two deflector connectors, one for hooking to your shop vacuum using the 4 foot hose that comes with the unit, and one for your vacuum hose.  The deflector plate attaches to a modified Gamma Lid.   This lid will screw onto any 5 or 7 gallon bucket fitted with a gamma adapter.  Everything is replaceable.

Save your back and your your shop vacuum when sucking up really bad stuff.   Because it works wet or dry, this industrial grade cyclonic vacuum bucket works in any environment.  As a result of heavy duty construction, when your bucket is full, remove the deflector lid and replace with a solid Gamma Lid available at most hardware stores.  This lid seals in the nasty stuff for easy transport and disposal.

cyclonic-bucket-lid-fits-gamma-adapters
Commercial Grade Cyclonic Vacuum Bucket Lid.

 

 

 

 

 

 

 

 

 

 

 

 

 

cyclonic-bucket-lid-gamma-lid-7-gallon-bucket
Inside of cyclonic bucket lid showing deflectors on metal plate attached to Gamma Screw On Lid.

 

 

 

 

 

 

 

 

 

 

 

 

 

Low Loss Vacuum Hose

This bucket comes with 4 feet of 2-inch ID, commercial grade low loss vacuum hose. Consequently, this low loss vacuum hose has a 20% better flow rate and is a direct replacement for standard 2-1/2″ OD shop vacuum hose.  Therefore, the hose adapters will fit any 2-1/2″ shop vacuum hose inlet.

 

2"x4-feet-vacuum-hose-low-loss-industrial-grade
2-inch low loss commercial grade vacuum hose with shop vacuum hose fittings. Fits any Shop Vacuum 2-1/2″ OD hose fitting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

We’re here to help

Cat 6 Tools, LLC
Cat 6 Tools, LLC
Henderson, NV
info@cat6tools.com
702-533-4363

 

For more information give us a call, text,  or send us an Email.

Additional information

Weight 12 lbs
Dimensions 24 × 18 × 18 in