2-1/2 Inch Vacuum Hose Elbows 45 and 90 deg


  • Fits standard 2-1/2″ hose cuffs

  • Available 45 or 90 degree

  • 90 deg elbow is Standard Sch 40 PVC

  • Hose Cuffs are PETG Plastic.

  • Works well on exit or entrance vacuum hose adapters

Clear selection


This Vacuum Hose Elbow for 2-1/2″ hose allows eliminates larger hose loops.

This unique vacuum hose elbow adapts standard 2-1/2 inch shop vacuum hose (or 2″ commercial hose) male ends to a female shop vacuum inlet adapter.   This fitting in available in 45 or 90 degrees.  It provides 2 inch schedule 40 PVC pipe at the bend where wear occurs.   The PETG plastic adapter end fittings work extremely well in any 2-1/2″ shop vacuum inlet adapter.   In addition, this fitting is designed specifically to work with the Cat 6 Tools’ vacuum filter buckets and drums where short hoses between bucket and vacuum make for more efficient systems. Furthermore, two of these fittings will mate together to form an “S” joint.  Lastly, these fittings will also adapt to a bucket side tangential inlet so that hose from the ground can easily adapt to the bucket inlet.   This provides more stability to the bucket.

Vacuum Hose Elbow available in 90 and 45 degrees

2-1/2″ vacuum hose 90 degree elbow adapter male and female ends for shop vacuum hoses
45 deg vacuum hose elbow male and female ends. Fits standard shop vacuum hose adapters


90 degree elbow for 2-1/2″ vacuum hose by Cat 6 Tools, LLC



Cat 6 Tools’ 2-1/2″ vacuum hose elbow adapter attached to filter drum


How the use of Cat 6 Tools 45 and 90 deg elbows reduce large vacuum hose loops.
2-1/2″ vacuum hose elbow attached to 8 gallon filter drum. This adapter works with standard 2-1/2″ shop vacuum hose.

Additional information

Weight 1 lbs
Dimensions 9 × 6 × 3 in
Hose Adapter

90 Degree, 45 Degree