Hose Adapter

Showing all 8 results

  • adapter-straight-bulkhead-2-1/2-inch-shop-vac-hose
    Bulkhead Straight Hose Adapter

    • This hose adapter fits 2-1/2" Shop Vac hose cuffs

    • Bulkhead Fitting for flat plates 0.125 inch thick

    • Made of PETG plastic

    • 3 #12 screws included for mounting

    $24.95 Add to cart
  • Makita Blower Outlet Locking Hose Adapter
    Makita Blower Outlet Locking Hose Adapter

    • Attaches to Makita BHX-2500-CA Blower outlet

    • Makes a secure pressure fitting

    • Fits standard 2-1/2" Shop Vac hoses

    • Easy 1/4 rotation lock.

    • Allen Screw to secure.

    Call Cat 6 Tools at 702-533-4363 for questions about this product.

    $34.95 Add to cart
  • adapter-male-shop-vac-hose-to-2-inch-tube
    Shop Vac Hose Adapter to 2 inch Tube

    • Adapters to the male end of all 2-1/2" Shop Vac hoses.

    • Makes tight, easy to connect vacuum seal

    • Made of Hard PETG plastic

    $24.95 Add to cart
  • hose-cuff-swivel-2-one-half-inch-hose-to-vacuum
    Flexible Swivel Hose Cuff
    • Fits 2-1/2" OD Commercial Vacuum Hose
    • Fits snugly on 2" metal tubing
    • Has a smooth swivel rotation 360 degrees.
    • Designed to thread on to the exterior profile of industry standard 2.0” inner diameter crush proof hose with a female slip end measuring 2.0” on the inner diameter
    • Molded using an 85-90 shore PVC permitting the threads engaging the hose a degree of flexibility accommodating minor variation in the pitch and spacing of the hose corrugations
    • Designed for the left hand thread pattern typical of spiral would crush proof hoses and easily engages the hose holding secure against stripping from the hose
    • The stop shoulder helps insure a smooth transition of the air stream into the hose
    $15.95 Add to cart
  • 2-1/2 -inch-vacuum-hose-90-degree-elbow-adapter for shop vacuums
    Vacuum Hose Elbow 45 and 90 deg

    • Fits standard 2-1/2" hose cuffs

    • Available 45 or 90 degree

    • 90 deg elbow is Standard Sch 40 PVC

    • Hose Cuffs are PETG Plastic.

    • Works well on exit or entrance vacuum hose adapters

    $24.95 Select options
  • shop-vacuum-hose-adapter-2-1/2-inch-threaded
    Digger Vacuum Hose Adapter

    • Made of PETG plastic

    • Threaded - left hand thread for vacuum hose

    • Adapts to 2-1/2" Commercial Grade Vacuum hose

    • Fits into any 2-1/2" Shop Vacuum Inlet/Outlet

    • Maintains vacuum yet provides a slip fit over 2" metal tubing

    • Recommended for Holey Moley Diggers

    $14.95 Add to cart
  • hose-cuff-flexible-gray-threaded
    Flexible Vacuum Hose Cuff 2-1/2 Inch

    • 2-1/2" Flexible Vacuum Hose Cuffs

    • Soft Flexible Rubber

    • Threaded for 2-1/2" Commercial Hose

    • Fits Standard 2-1/2" Shop Vacuum Hose Receptacle

    $14.95 Add to cart
  • vacuum-hose-pipe-adapter
    Vacuum Hose Pipe Adapter
    • Made of PETG plastic
    • Adapts to standard 2-1/2" ShopVac hose
    • Adapts to any 2" PVC Pipe Coupling
    • Use EPOXY for solid connection.
    $21.95 Add to cart