Wet/Dry Vacuum Separators
Showing all 12 results
-
$299.95 Add to cart
Cyclonic Separator 5 Gallon Steel Pail
-
Includes 5 gallon steel pail with Cyclonic Separator Lid
-
Ready to go with 4 ft and 8 ft of vacuum hose
-
Ports are suitable for standard 2-1/2" Shop Vacuum Hose
-
Adapters are made of durable high strength PETG Plastic
-
Latches with safety catch firmly hold lid on
-
Works with most shop vacuums with 2-1/2" hose
-
Suitable for sand, gravel, mud, and most solids and liquids
-
Do not use with flammable or volatile liquids
-
-
$109.00 Add to cart
Cyclonic Separator Bucket Lid with Lock Ring Clamp
-
11.75 inch Anodized Aluminum Plate
-
2 - PETG Deflectors
-
1 - Locking Ring Clamp
-
Fits standard 5 and 7 gallon Plastic Buckets.
-
-
$325.00 Add to cart
Cyclonic Separator Plastic Bucket -7 Gal – Ring Clamp
-
7 Gallon Plastic Bucket
-
Anodized Aluminum Plate
-
Comes with two hoses 4 feet and 8 feet
-
Lever Lock Ring Clamp for easy opening
Call if you have any questions
702-533-4363
-
-
$24.95 Add to cart
Cyclonic Vacuum Deflector
-
90 degree vacuum hose deflector
-
Works best in pairs, one inlet, one outlet
-
Adapts to standard 2-1/2 inch shop vac hose.
-
Made for Cat 6 Tools' Cyclonic Lids
-
Comes with 3 #12 mounting screws
-
Made of PETG hard, durable Plastic
-
Can be used as inlet or outlet
-
-
$482.00 – $876.00 Select options
Cyclone Separator Vacuum Drum
-
8 or 16 gallon
-
2-1/2" vacuum hose Inlet/Outlet
-
Stainless Steel Locking Latches
-
Stainless Steel Lifting Handles
-
Available with full (non-cyclonic) lid for containment
-
Works with high vacuum (industrial vacuums) without collapse
-
PETG Plastic Inlet/Outlet
-
-
$149.95 Add to cart
Cyclonic Separator Plastic Bucket Gamma Lid
- Ready to use out of the box
- Includes Laser cut metal plate for durability
- Cyclonic Deflectors and Plate are bolted to a modified Gamma Lid
- Includes Gamma Lid bucket adapter ring
- Hard plastic deflectors. Use either hole for inlet or outlet.
- Made for standard 2-1/2" shop vacuum hose adapters.
- Made for wet/dry operation
- Will handle gravel up to 1-1/2"
-
$83.86 – $246.25 Select options
Low Loss Vacuum Hose 2-1/2 inch Hard Cuffs
-
8 foot hose improves flow rate over standard Shop Vac Hose by 20%
-
Vacuum Hose 4', 8', 10', 12', 15', 20' lengths
-
Easy thread on Hard Hose Cuffs - Left Hand Threads
-
Hose Cuffs Slip Fit on 2" Metal Tubing
-
Hard Plastic Hose Cuffs are made for Holey-Moley Diggers
-
The Hose Cuffs work with Standard 2-1/2" Shop Vacuum Inlets
-
2-1/2" OD, 2" ID
-
Commercial Grade
-
Won't Kink like Shop Vacuum Hose
-
Smooth Low Loss Interior Bore
-
Crush Resistant.
-
Bright Orange for areas with high traffic.
-
UV / Fade Resistant
-
8 to 10 Feet Recommended for Shop Vac to Diggers
-
4 Feet Recommended Shop Vac to Separator
call for custom lengths
Got a question? Call us at 702-533-4363
-
-
$155.00 Add to cart
7 Gal Plastic Bucket Side Handle
-
Mounts to 7 gallon bucket side grips
-
Takes the load off of Engine Mounts on Gas Engine Vacuum Buckets
-
Made of 1/2" Aluminum tubing
-
Mounting hardware 1/4-20 bolts included
-
Easiy supports 50 to 60 pound loads
-
-
$34.75 Add to cart
Lever Lock Clamp Ring
-
This Lever Lock Clamp Ring is a ring closure for UN Rated steel pails
-
When closed, the ring overlaps to ensure sealing power completely encircles the lid and eliminating gaps
-
The unique design is as dependable as a bolt ring, and yet much easier to apply and remove over and over again
-
Easier to open and close than bolt rings
-
Install and open without tools
-
Can be used for shipping non-hazardous materials
-
-
Sale!$350.00 Add to cart
Cyclonic Separator Plastic Bucket – Gamma Lid
-
Known as the Flood Buddy for cleaning up after flood damage.
-
Ready to use out of the box with 2 low loss hoses
-
Includes 7 gallon bucket and Cyclonic Lid
-
Low loss hoses are, 4ft and 8ft in length
-
Includes Laser cut metal plate for durability bolted to a modified Gamma Lid
-
Includes Gamma Lid bucket adapter on 7 gallon bucket.
-
Hard plastic deflectors. Use either hole for inlet or outlet.
-
Made for standard 2-1/2" shop vacuum hose adapters.
-
Made for wet/dry and dry gravel up to 1-1/2"
-
-
$24.95 Select options
Vacuum Hose Elbow 45 and 90 deg
-
Fits standard 2-1/2" hose cuffs
-
Available 45 or 90 degree
-
90 deg elbow is Standard Sch 40 PVC
-
Hose Cuffs are PETG Plastic.
-
Works well on exit or entrance vacuum hose adapters
-
-
$21.95 Add to cart
Vacuum Hose Pipe Adapter
- Made of PETG plastic
- Adapts to standard 2-1/2" ShopVac hose
- Adapts to any 2" PVC Pipe Coupling
- Use EPOXY for solid connection.