• 7-gal-plastic-bucket-side-carry-handle
    7 Gal Plastic Bucket Side Handle
    • Mounts to 7 gallon bucket side grips

    • Takes the load off of Engine Mounts on Gas Engine Vacuum Buckets

    • Made of 1/2" Aluminum tubing

    • Mounting hardware 1/4-20 bolts included

    • Easiy supports 50 to 60 pound loads

    $155.00 Add to cart
  • adapter-straight-bulkhead-2-1/2-inch-shop-vac-hose
    Bulkhead Straight Hose Adapter
    • This hose adapter fits 2-1/2" Shop Vac hose cuffs

    • Bulkhead Fitting for flat plates 0.125 inch thick

    • Made of PETG plastic

    • 3 #12 screws included for mounting

    $24.95 Add to cart
  • rieke-lever-lock-ring-pail-clamp
    Lever Lock Clamp Ring
    • This Lever Lock Clamp Ring is a ring closure for UN Rated steel pails

    • When closed, the ring overlaps to ensure sealing power completely encircles the lid and eliminating gaps

    • The unique design is as dependable as a bolt ring, and yet much easier to apply and remove over and over again

    • Easier to open and close than bolt rings

    • Install and open without tools

    • Can be used for shipping non-hazardous materials

    $34.75 Add to cart
  • filter-drum-tangential-inlet-8-16 gallon
    Vacuum Drum Filter Separator
    • Available 8 and 16 gallon drums

    • Tangential Inlet - fits standard 2-1/2"  shop vac hose - 2" inlet

    • Uses standard Ridgid Vacuum Filters

    • Includes two hoses, 4 feet and 8 feet

    • Powder Coated Steel Drum

    • High quality locking lid latches

    • Steel handles for easy carry

    Limited Inventory - allow three weeks for build if not in stock. Note: Gray is no longer available, our new color is Black, we only have one or two gray ones left.

    Got a question?  Give us a call at 702-533-4363

    Select drum size below

    $695.00$782.00 Select options
  • vacuum-drum-16-gallon-makita-lid
    Vacuum Separator Drum 8-16 Gallon with Full Lid
    • 16 gallon drum with tangential inlet

    • Comes with Modified lid for a Mikita Blower (Vacuum)

    • Includes lifting handles

    • Long Life Black Powder Coat with Primer.

    $485.00 Add to cart
  • Tangential Filter Separator 7 Gallon Steel Pail
    Tangential Filter Separator 7 Gallon Steel Pail
    • Includes 7 gallon steel pail with Filter Separator Lid 

    • 4 foot and 8 feet of hose are included

    • Pail includes high efficiency 2 inch steel tangential inlet tube.

    • Ports are suitable for standard 2-1/2" Shop Vacuum Hose

    • UN Rated Lever Lock Ring firmly holds lid on

    • Wet/Dry Operation suitable for sand, gravel, mud, and most solids and liquids

    Got a question?  Give us a call. 702-533-4363
    $424.85 Add to cart
  • filter-separator-drum-lid
    Wet-Dry Drum Filter Lid
    • Filter Separator Wet Dry Drum Lid

    • Fits 8 and 16 gallon drums

    • Drums should have a tangential or side inlet

    • Uses Standard Ridgid Filters

    • Ideal accessory lid for Makita Gasoline Powered Vacuum Filter Drums

    • Suction Port for 2-1/2 inch Shop Vac hose adapters

    $164.95 Add to cart
  • c6ts-vacuum-filter-assembly
    Vacuum Filter Holder Assembly
    • Fits Cat 6 Tools Tangential Filter Separator pails, buckets and drums

    • This filter holder fits Cat 6 Tools Makita Vacuum

    • Uses Standard Ridgid VF4000, 5000, 6000, 7000 Filters

    • Attaches with 4 1/4-20 x 1/2" bolts

    • Made of Nylon and PETG plastics

    • Filter not included

    $54.95 Add to cart
  • tangential-inlet-vacuum-filter-bucket-commercial-grade
    Tangential Filter Separator 7 Gal Plastic Bucket
    • Includes laser cut metal plate with vacuum outlet adapter
    • Made for wet/dry filter adapter with float
    • Includes two vacuum hoses 4 ft and 8 ft
    • Uses standard Rigid Vacuum filters, Single Ply filter included
    • Fits any shop vacuum 2-1/2" hose adapter
    • Tangential inlet includes metal 2" tubing for durability
    • The Tangential inlet adapter works with standard 2-1/2" hose adapters
    • This is the finest cyclonic bucket assembly made.
    $424.95 Add to cart
  • 2-1/2 -inch-vacuum-hose-90-degree-elbow-adapter for shop vacuums
    Vacuum Hose Elbow 45 and 90 deg
    • Fits standard 2-1/2" hose cuffs

    • Available 45 or 90 degree

    • 90 deg elbow is Standard Sch 40 PVC

    • Hose Cuffs are PETG Plastic.

    • Works well on exit or entrance vacuum hose adapters

    $24.95 Select options
  • 2-1/2-inch-commercial-vacuum-hose
    Low Loss Vacuum Hose 2-1/2 inch Flexible Cuffs
    • 2-1/2" OD, 2" ID

    • Crushproof

    • Industrial Grade

    • UV / Fade Resistant

    • Smooth Interior Bore

    • Flexible Threaded Hose Cuffs

    • Fits Standard Shop Vacuum 2-1/2" Inlet

    Choose hose length below

    $68.93$137.86 Select options
  • commercial-grade-low-loss-vacuum-hose-2-1/2'
    Low Loss Vacuum Hose 2-1/2 inch Hard Cuffs
    • Vacuum Hose 4', 8' lengths

    • Easy thread on Hard Hose Cuffs

    • Hose Cuffs Slip Fit on 2" Metal Tubing

    • Hard Plastic Hose Cuffs are made for Holey-Moley Diggers

    • The Hose Cuffs work with Standard 2-1/2" Shop Vacuum Inlets

    • 2-1/2" OD, 2" ID

    • Commercial Grade

    • Won't Kink like Shop Vacuum Hose

    • Smooth Low Loss Interior Bore

    • Crush Resistant.

    • Bright Orange for areas with high traffic.

    • UV / Fade Resistant

    • 8 to 10 Feet Recommended for Shop Vac to Diggers

    call for custom lengths

    Got a question?  Call us at 702-533-4363

    $68.93$137.86 Select options