Vacuum System Accessories

Showing 1–12 of 18 results

  • filter-separator-drum-lid
    Wet-Dry Drum Filter Lid

    • Filter Separator Wet Dry Drum Lid

    • Fits 8 and 16 gallon drums

    • Drums should have a tangential or side inlet

    • Uses Standard Ridgid Filters

    • Ideal accessory lid for Makita Gasoline Powered Vacuum Filter Drums

    • Suction Port for 2-1/2 inch Shop Vac hose adapters

    $164.95 Add to cart
  • commercial-grade-low-loss-vacuum-hose-2-1/2'
    Low Loss Vacuum Hose 2-1/2 inch Hard Cuffs

    • 8 foot hose improves flow rate over standard Shop Vac Hose by 20%

    • Vacuum Hose 4', 8', 10', 12', 15', 20' lengths

    • Easy thread on Hard Hose Cuffs - Left Hand Threads

    • Hose Cuffs Slip Fit on 2" Metal Tubing

    • Hard Plastic Hose Cuffs are made for Holey-Moley Diggers

    • The Hose Cuffs work with Standard 2-1/2" Shop Vacuum Inlets

    • 2-1/2" OD, 2" ID

    • Commercial Grade

    • Won't Kink like Shop Vacuum Hose

    • Smooth Low Loss Interior Bore

    • Crush Resistant.

    • Bright Orange for areas with high traffic.

    • UV / Fade Resistant

    • 8 to 10 Feet Recommended for Shop Vac to Diggers

    • 4 Feet Recommended Shop Vac to Separator

    call for custom lengths

    Got a question?  Call us at 702-533-4363

    $83.86 – $246.25 Select options
  • makita-adapter-kit-with-ring-clamp
    Makita Vacuum Bucket Mounting Kit

    • Includes 11.5" Aluminum Plate

    • Comes with Makita Adapters rings

    • Include Support straps

    • Stainless hardware

    • Includes locking ring clam

    For additional information call 702-533-4363

    $225.00 Add to cart
  • 2-in-pipe-to-2-1/2-vac-hose-adapter-with-plug
    2″ Vacuum System Inlet with Plug

    2 Inch PVC Pipe to 2-1/2 inch Shop Vac Hose Adapter

    Pipe Coupling is ready to glue to PVC pipe

    Use standard PVC Glue

    Hose adapter works with hard or soft hose cuffs

    Comes with Plug and Lanyard

    For information call Cat 6 Tools
    702-533-4363
    $58.95 Add to cart
  • 7-gal-plastic-bucket-side-carry-handle
    7 Gal Plastic Bucket Side Handle

    • Mounts to 7 gallon bucket side grips

    • Takes the load off of Engine Mounts on Gas Engine Vacuum Buckets

    • Made of 1/2" Aluminum tubing

    • Mounting hardware 1/4-20 bolts included

    • Easiy supports 50 to 60 pound loads

    $155.00 Add to cart
  • Makita Blower Outlet Locking Hose Adapter
    Makita Blower Outlet Locking Hose Adapter

    • Attaches to Makita BHX-2500-CA Blower outlet

    • Makes a secure pressure fitting

    • Fits standard 2-1/2" Shop Vac hoses

    • Easy 1/4 rotation lock.

    • Allen Screw to secure.

    Call Cat 6 Tools at 702-533-4363 for questions about this product.

    $34.95 Add to cart
  • makita-adapter-kit-with-ring-clamp
    Makita Engine Drum Adapter Kit
    • Mounts a Makita BHX2500CA to drum lid for 8-16 gal drum.

    • Mounting kit includes adapters, hardware and drum lid

    • Includes Drum Lid modified for this mounting kit.

    • Mounting strap included.

    Call for specific details. 702-533-4363

    $74.95 – $119.95 Select options
  • rieke-lever-lock-ring-pail-clamp
    Lever Lock Clamp Ring

    • This Lever Lock Clamp Ring is a ring closure for UN Rated steel pails

    • When closed, the ring overlaps to ensure sealing power completely encircles the lid and eliminating gaps

    • The unique design is as dependable as a bolt ring, and yet much easier to apply and remove over and over again

    • Easier to open and close than bolt rings

    • Install and open without tools

    • Can be used for shipping non-hazardous materials

    $34.75 Add to cart
  • Shop Vacuum Adapter Hose Inlet Plug
    Shop Vacuum Adapter Hose Inlet Plug

    • Plugs any 2-1/2" Shop Vac Hose Inlet

    • Made of durable PETG Plastic

    • Includes Lanyard

    • Works with all Cat 6 Tools Vacuum Hose Female Fittings

    • Works with all Cat 6 Tools Vacuum and Bucket Female Fittings.

    Call if you have any questions about this product 702-533-4363
    $27.95 Add to cart
  • c6ts-vacuum-filter-assembly
    Vacuum Filter Holder Assembly

    • Fits Cat 6 Tools Tangential Filter Separator pails, buckets and drums

    • This filter holder fits Cat 6 Tools Makita Vacuum

    • Uses Standard Ridgid VF4000, 5000, 6000, 7000 Filters

    • Attaches with 4 1/4-20 x 1/2" bolts

    • Made of Nylon and PETG plastics

    • Filter not included

    $54.95 Add to cart
  • adapter-male-shop-vac-hose-to-2-inch-tube
    Shop Vac Hose Adapter to 2 inch Tube

    • Adapters to the male end of all 2-1/2" Shop Vac hoses.

    • Makes tight, easy to connect vacuum seal

    • Made of Hard PETG plastic

    $24.95 Add to cart
  • vacuum-hose-connector-threaded-2-1/2-inch
    Female Hose Connector Threaded

    • Vacuum Hose Connector for 2-1/2" OD Industrial Hose

    • Left Hand Threads

    • Made of PETG durable hard plastic.

     
    $18.95 Add to cart