Vacuum Systems
Showing 1–12 of 16 results
-
$18.95 Select options
2-1/2 Inch Vacuum Hose Elbow
2-1/2 Inch Vacuum Hose Elbow allows for shorter hoses between shop vacuum and filter buckets. This unique 90 degree elbow adapts standard 2-1/2 inch shop vacuum hose (or 2″ commercial hose) male ends to a female shop vacuum adapter. This … Continued
-
$18.95 Add to cart
Female Hose Connector 2 inch
-
Vacuum Hose Connector for 2-1/2" OD Industrial Hose
-
Left Hand Threads
-
Made of PETG durable hard plastic.
-
-
$25.00 Select options
Makita Blower Outlet Hose Adapter
-
Adapter fits tightly into the outlet of a Makita Blower.
-
2" metal tube provides slip fit for 2-1/2" vacuum hoses.
-
Can be used with Soft or Hard hose cuffs.
-
Made of PVC pipe and plated steel tubing.
-
-
$104.50 Add to cart
Makita Engine Mounting Kit
-
This Kit for is for mounting a Makita BHX2500CA leaf blower to a modified bucket Gamma Lid plate.
-
Kit includes Adapters and mounting hardware. See Photo.
-
Installs in less than 10 minutes.
-
Video Guide shows all tools, and installation process
-
Note: Kit requires a modified gamma lid plate.
-
-
$654.00 Add to cart
Makita Gasoline Vacuum Pail
-
Makita 4-cycle gas engine
-
230 CFM airflow and up to 15 inches of water suction
-
Includes 7 gallon steel pail with tangential inlet
-
Full 6 gallon capacity
-
Pail includes high efficiency 2 inch steel inlet with 2-1/2" hose adapter.
-
Inlet adapter and filter adapter are made of durable high strength PETG Plastic
-
UN Rieke Lever Lock Ring firmly holds lid on
-
Suitable for sand, gravel, and most solids and water
-
Will handle up to 1-3/4 inch gravel
Currently out of stock. Accepting orders for January 31 delivery.
-
-
$424.85 Add to cart
Tangential Filter Separator 7 Gallon Steel Pail
-
Includes 7 gallon steel pail with Filter Separator Lid
-
Full 6 gallon capacity
-
Pail includes high efficiency 2 inch steel tangential inlet tube.
-
Ports are suitable for standard 2-1/2" Shop Vacuum Hose
-
Ports are made of durable high strength PETG Plastic
-
UN Rated Lever Lock Ring firmly holds lid on
-
Works with most shop vacuums with 2-1/2" hose
-
Wet/Dry Operation suitable for sand, gravel, mud, and most solids and liquids
-
Will handle up to 1-3/4 inch gravel
-
-
$24.95 Add to cart
Vacuum Hose Connector Slip-Fit
-
Vacuum Hose Connector
-
Hose Cuff-to-Hose Cuff
-
For 2-1/2" Low Loss Vacuum Hose
-
Made of tough PETG Plastic
-
Stays connected resists tugging
-
-
$164.95 Add to cart
Wet Dry Drum Filter Lid
-
Filter Separator Wet Dry Drum Lid
-
Fits 8 and 16 gallon drums
-
Drums should have a tangential or side inlet
-
Uses Standard Ridgid Filters
-
Ideal accessory lid for Makita Gasoline Powered Vacuum Filter Drums
-
Suction Port for 2-1/2 inch Shop Vac hose adapters
-
-
$966.90 – $1,076.00 Select options
Makita Gasoline Powered Vacuum Drum
-
Available in 8 or 16 gallon drums
-
Drums are powder coated for long life and durability
-
Comes with 8 feet of Commercial low loss vacuum hose
-
Includes High efficiency 4-cycle Makita engine – no mixing of gas and oil
-
Runs many hours on 1 gallon of gas
-
Pulls 14.5 Inches of H2O vacuum
-
230 CFM airflow with 8ft of hose
-
Ideal for operating the Holey-Moley Diggers without electricity
-
8 gal drum weighs 25 pounds with 8 feet of vacuum hose
-
16 gal drum weighs 30 pounds with 8 feet of vacuum hose
Got a question about this Product? Give us a call 702-533-4363 or
Select 8 or 16 gallons below. If on backorder allow up to 4 weeks for delivery.
-
-
$765.60 Add to cart
Tangential Gas Powered Vacuum Filter Bucket
- Comes with Filter installed.
- Filter assembly can easily be removed by customer.
- Finger guard easily installed by customer
- Includes Makita 4 cycle engine – no mixing of gas and oil
- Commercial low loss vacuum hose - 8ft
- Runs a full hour on one tank (0.52 L) of gas
- Pulls 14.5 Inches of H2O vacuum
- 230 CFM airflow with 8ft of hose
- Ideal for operating the Holey-Moley Diggers without electricity
- Light Weight 23 pounds with 8ft of low loss vacuum hose
- See Made for the prospector a Quick Summary below
-
$149.95 Add to cart
Cyclonic Separator Plastic Bucket Lid
- Ready to use out of the box
- Includes Laser cut metal plate for durability
- Cyclonic Deflectors and Plate are bolted to a modified Gamma Lid
- Includes Gamma Lid bucket adapter ring
- Hard plastic deflectors. Use either hole for inlet or outlet.
- Made for standard 2-1/2" shop vacuum hose adapters.
- Made for wet/dry operation
- Will handle gravel up to 1-1/2"
-
$42.95 – $138.95 Select options
Vacuum Hose 2-1/2 inch Low Loss Flexible Cuffs
- 2-1/2" OD, 2" ID
- Crushproof
- Industrial Grade
- UV / Fade Resistant
- Smooth Interior Bore
- Flexible Threaded Hose Cuffs
- Fits Standard Shop Vacuum 2-1/2" Inlet