Vacuum Equipment
Showing 1–12 of 15 results
-
$259.95 Add to cartCyclonic Separator 5 Gallon Steel Pail
-
Includes 5 gallon steel pail with Cyclonic Separator Lid
-
Comes with 4 feet and 8 feet of vacuum hose so you are ready to go
-
Ports are suitable for standard 2-1/2" Shop Vacuum Hose
-
Adapters are made of durable high strength PETG Plastic
-
Latches with safety catch firmly hold lid on
-
Works with most shop vacuums with 2-1/2" hose
-
Suitable for sand, gravel, mud, and most solids and liquids
-
Do not use with flammable or volatile liquids
-
-
$424.85 Add to cartTangential Filter Separator 7 Gallon Steel Pail
-
Includes 7 gallon steel pail with Filter Separator Lid
-
Full 6 gallon capacity
-
Pail includes high efficiency 2 inch steel tangential inlet tube.
-
Ports are suitable for standard 2-1/2" Shop Vacuum Hose
-
Ports are made of durable high strength PETG Plastic
-
UN Rieke Lever Lock Ring firmly holds lid on
-
Works with most shop vacuums with 2-1/2" hose
-
Wet/Dry Operation suitable for sand, gravel, mud, and most solids and liquids
-
Will handle up to 1-3/4 inch gravel
Currently out of stock. Accepting orders for January 31 delivery.
-
-
$695.00 – $782.00 Select optionsTangential Filter Separator Vacuum Drums
-
Available 8 and 16 gallon drums
-
Tangential Inlet - fits standard 2-1/2" shop vac hose - 2" inlet
-
Uses standard Ridgid Vacuum Filters
-
Includes two hoses, 4 feet and 8 feet
-
Powder Coated Steel Drum
-
High quality locking lid latches
-
Steel handles for easy carry
-
-
$164.95 Add to cartWet Dry Drum Lid Filter
-
Filter Separator Wet Dry Drum Lid
-
Fits 8 and 16 gallon drums
-
Drums should have a tangential or side inlet
-
Uses Standard Ridgid Filters
-
Ideal accessory lid for Makita Gasoline Powered Vacuum Filter Drums
-
Suction Port for 2-1/2 inch Shop Vac hose adapters
-
-
$879.00 – $979.00 Select optionsGasoline Powered Vacuum Filter Drum
-
Available in 8 or 16 gallon drums
-
Drums are powder coated for long life and durability
-
Comes with 8 feet of Commercial low loss vacuum hose
-
Includes High efficiency 4-cycle Makita engine – no mixing of gas and oil
-
Runs many hours on 1 gallon of gas
-
Pulls 14.5 Inches of H2O vacuum
-
230 CFM airflow with 8ft of hose
-
Ideal for operating the Holey-Moley Diggers without electricity
-
8 gal drum weighs 25 pounds with 8 feet of vacuum hose
-
16 gal drum weighs 30 pounds with 8 feet of vacuum hose
Got a question about this Product? Give us a call 702-533-4363 or
Select 8 or 16 gallons below. If on backorder allow up to 4 weeks for delivery.
-
-
$579.50 – $679.95 Select optionsTangential Gas Powered Vacuum Filter Bucket
- Available with or without filter assembly
- Includes Makita 4 cycle engine
- Commercial low loss vacuum hose - 8ft
- High efficiency 4-cycle Makita engine – no mixing of gas and oil
- Runs many hours on 1 gallon of gas
- Pulls 14.5 Inches of H2O vacuum
- 230 CFM airflow with 8ft of hose
- Ideal for operating the Holey-Moley Diggers without electricity
- Light Weight 23 pounds with 8ft of low loss vacuum hose
-
$499.00 Add to cartPortable Engine Driven Shop Vacuum System
Portable Engine Driven Shop Vacuum System
-
Light Weight 19 pound system
-
High efficiency 4-cycle Makita engine - no mixing of gas and oil
-
Runs many hours on 1 gallon of gas
-
Pulls 14.5 Inches of H2O vacuum
-
180 CFM airflow is ideal for operating the Holey-Moley Digger
Got a question? Give us a call 702-533-4363
-
-
$259.95 Add to cartCyclonic Separator 7 Gallon Plastic Bucket
-
Known as the Flood Buddy for cleaning up after flood damage.
-
Ready to use out of the box
-
Includes 7 gallon bucket and Cyclonic Lid
-
The System comes complete with two hoses, 4ft and 8ft.
-
Includes Laser cut metal plate for durability bolted to a modified Gamma Lid
-
Includes Gamma Lid bucket adapter on 7 gallon bucket.
-
Hard plastic deflectors. Use either hole for inlet or outlet.
-
Made for standard 2-1/2" shop vacuum hose adapters.
-
Made for wet/dry and dry gravel up to 1-1/2"
-
-
$149.95 Add to cartCyclonic Separator Plastic Bucket Lid
- Ready to use out of the box
- Includes Laser cut metal plate for durability
- Cyclonic Deflectors and Plate are bolted to a modified Gamma Lid
- Includes Gamma Lid bucket adapter ring
- Hard plastic deflectors. Use either hole for inlet or outlet.
- Made for standard 2-1/2" shop vacuum hose adapters.
- Made for wet/dry operation
- Will handle gravel up to 1-1/2"
-
$79.95 Add to cartCyclonic Separator Steel Pail Lid
- Ready to use out of the box
- Includes lid with deflectors
- Cyclonic Deflectors are mounted on modified steel pail lid
- Includes gasket ring
- Hard plastic deflectors. Use either hole for inlet or outlet.
- Made for standard 2-1/2" shop vacuum hose adapters.
- Made for wet/dry operation
- Will handle gravel up to 1-1/2"
-
$424.95 Add to cartTangential Filter Separator 7 Gal Plastic Bucket
- Includes laser cut metal plate with vacuum outlet adapter
- Made for wet/dry filter adapter with float
- Includes two vacuum hoses 4 ft and 8 ft
- Uses standard Rigid Vacuum filters, Single Ply filter included
- Fits any shop vacuum 2-1/2" hose adapter
- Tangential inlet includes metal 2" tubing for durability
- The Tangential inlet adapter works with standard 2-1/2" hose adapters
- This is the finest cyclonic bucket assembly made.
-
$14.95 Add to cartDigger Vacuum Hose Adapter
-
Made of PETG plastic
-
Threaded - left hand thread for vacuum hose
-
Adapts to 2-1/2" Commercial Grade Vacuum hose
-
Fits into any 2-1/2" Shop Vacuum Inlet/Outlet
-
Maintains vacuum yet provides a slip fit over 2" metal tubing
-
Recommended for Holey Moley Diggers
-