Holey-Moley Diggers
Showing 1–12 of 17 results
Post Hole Diggers, Core Diggers and Post Hole Reamers
-
$18.95 Add to cartFlexible Swivel Hose Cuff
- Fits 2-1/2" OD Commercial Vacuum Hose
- Fits snugly on 2" metal tubing
- Has a smooth swivel rotation 360 degrees.
- Designed to thread on to the exterior profile of industry standard 2.0” inner diameter crush proof hose with a female slip end measuring 2.0” on the inner diameter
- Molded using an 85-90 shore PVC permitting the threads engaging the hose a degree of flexibility accommodating minor variation in the pitch and spacing of the hose corrugations
- Designed for the left hand thread pattern typical of spiral would crush proof hoses and easily engages the hose holding secure against stripping from the hose
- The stop shoulder helps insure a smooth transition of the air stream into the hose
-
$518.00 – $577.00 Select optionsHoley-Moley Core Digger
-
4", 5", 6" diameters available
-
Works in Hard Clay, Hard Soils, and Moist Soils. Does not work well in Sticky Clay.
-
Digger is complete, ready to use.
-
Standard Core Tube Length - 12-inches (custom lengths available)
-
Digs holes up to 4-1/2 feet (54 -inches) deep
-
Extend digging depth with Post Hole Digger Vacuum Tube Extensions
-
Works with Shop Vacuums (recommended 12 amps, 180 to 200 CFM - typical 6.5HP). We recommend that you use your own shop vacuum first before buying a new one. 2-½ inch suction hose recommend for perfect fit to digger suction pipe
-
Works with our Tangential Gas Powered Vacuum Filter Bucket
-
All Blades are Replaceable
Got a question? Give us a call.
702-533-4363
Use drop down to select Diamter -
-
$533.00 – $570.00 Select optionsHoley-Moley Post Hole Digger
3-1/2", 4", 5", 6" diameters
NEW: 3-1/2" for signs and railings-
Works well in dry soils, soils with gravel and soils with some moisture. Does not work well in wet ground or wet clay.
-
Components are complete, ready to use
-
Digs holes up to 4-1/2 feet (54 inches) deep
-
The 3-1/2-inch is good for signs and railings
-
The 4-inch is good for round posts
-
Use 5-inch for 4x4 posts to get a tight fit, no concrete required
-
6-inch digger is best for 4 x 4 posts with concrete
-
Works with Shop Vacuums (recommended 12 amps, 180 to 200 CFM, typically sold as 6.5HP). We recommend that you use your own shop vacuum first before buying a new one.
-
Uses a 2-½" vacuum hose, standard with most large shop vacuum.
-
Works well with our Tangential Gas Powered Vacuum Filter Bucket. Comes with 8 feet of 2-½" Low Loss hose.
Got a question? Give us a call - 702-533-4363
Back Orders - Allow an additional 2 weeks. Call to check status. Sales are based on 1st-in, 1st-out.
Choose Digger Diameter -
-
$596.00 Add to cart8 Inch EZ Post Hole Reamer
Reams any 6-inch post hole to 8-inches
- Works in Hard Clay, Hard Soils, and Moist Soils. Does not work well in Sticky Clay.
- Complete assembly ready to use
- Diameter is 8-⅜" suitable for cardboard concrete tubes.
- Available as Quick Change Head
- Working depth 54" inches, extensions available.
- Works with Shop Vacuums (recommended 12 amps, 180 to 200 CFM - typical 6.5HP). We recommend that you use your own shop vacuum first before buying a new one. 2-½ inch suction hose recommend for perfect fit to digger suction pipe
- Works with our Portable Engine Driven Shop Vacuum System
- All Blades are Replaceable
- Can be extended with Post Hole Digger Vacuum Tube Extensions - 14", 28", 36", 48".
Got a question? Give us a call - 702-533-4363
Choose Assembly or Quick Change Head -
$612.00 Add to cart10 inch Post Hole Reamer
- Reams 6 inch diameter holes to 10-inches
-
Operates with Shop Vacuum to remove dirt while reaming
-
Enlarges any 6-inch diameter hole
-
Available as Complete Assembly on this page or Quick Change Head on QCH page.
-
Uses the same Handle and Upper Vacuum Tube as all diggers
-
Adjustable blade up position for 6-inch pilot tube
-
Adjustable blade down position to square off bottom of hole
-
Easy to operate
-
All steel construction
-
Replaceable blades
Got a question? Give us a call 702-533-4363
PN 1-91-1210
-
$708.00 Add to cart
12 inch Post Hole Reamer
- Reams a 6 inch diameter hole to 12 inches
-
Operates with Shop Vacuum to remove dirt while reaming
-
Enlarges any 6-inch diameter hole
-
Available as Complete Assembly this page or Quick Change Head.
-
Uses the same Handle and Upper Vacuum Tube as all diggers
-
Adjustable blade up position for 6-inch pilot tube
-
Adjustable blade down position to square off bottom of hole
-
Easy to operate
-
All steel construction
-
Replaceable blades
Got a question? Give us a call 702-533-4363
PN 1-91-1212
-
$288.00 – $526.00 Select optionsQuick Change Heads
- Save by purchasing one digger and adding a Quick Change Head for other digging options
- Just two bolts to make quick change
- Consists of Digger Head and lower vacuum tube
- Post Hole Digger sizes 4", 5", 6"
- Core Digger sizes 4", 5", 6"
- EZ Reamer size 8"
- Reamer sizes 10" and 12"
-
$1,230.00 Add to cartHoley Moley Post Hole Digger Universal Kit
- Save money by purchasing one Handle Assembly, Upper Vacuum Tube and 3 Quick Change Heads.
- Includes 3 Holey Moley Post Hole Digger Quick Change Heads - 4-inch, 5-inch, 6-inch
- All Heads are interchangeable
- Just two bolts to make quick change
- Works with our Portable Engine Driven Shop Vacuum System
- All Blades are Replaceable
- Can be extended with Post Hole Digger Vacuum Tube Extensions - 14", 28", 36", 48"
- Quick Change Heads are also available for Core Diggers and Reamer
-
$1,185.00 Add to cartHoley-Moley Core Digger Universal Kit
- Save money by purchasing one Handle Assembly, Upper Vacuum Tube and 3 Quick Change Heads.
- Includes 3 Holey Moley Core Digger Quick Change Heads - 4-inch, 5-inch, 6-inch
- All Heads are interchangeable
- Just two bolts to make quick change
- Works with our Portable Engine Driven Shop Vacuum System
- All Blades are Replaceable
- Can be extended with Post Hole Digger Vacuum Tube Extensions - 14", 28", 36", 48"
- Quick Change Heads are also available for Post Hole Diggers and Reamers
-
$136.00 – $164.00 Select optionsPost Hole Digger Vacuum Tube Extension
-
2" diameter tube with male and female slip on fittings
-
Available in 14-inch, 28-inch, 36-inch, 48-inch lengths
-
Precision fittings to maintain straightness
-
Made of plated steel tubing
-
Has a snug fit and connects with bolts, or wing knobs depending on design.
Note: Inquire for custom extension lengths.
Got a question? Give us a call 702-533-4363
Select Vacuum Tube Extension Length
-
-
$68.93 – $137.86 Select optionsLow Loss Vacuum Hose 2-1/2 inch Low Loss Hard Cuffs
- Vacuum Hose 4', 8' lengths
- Easy thread on Hard Hose Cuffs
- Hose Cuffs Slip Fit on 2" Metal Tubing
- Hard Plastic Hose Cuffs are made for Holey-Moley Diggers
- The Hose Cuffs work with Standard 2-1/2" Shop Vacuum Inlets
- 2-1/2" OD, 2" ID
- Commercial Grade
- Won't Kink like Shop Vacuum Hose
- Smooth Low Loss Interior Bore
- Crush Resistant.
- Bright Orange for areas with high traffic.
- UV / Fade Resistant
- 8 to 10 Feet Recommended for Shop Vac to Diggers
-
$34.95 Add to cartShop Vacuum Digging Attachments
-
Made for digging around drip irrigation lines
-
Includes 1 double ended hole shaver for hole enlargement
-
Includes 1 toothed digger attachment for digging
-
Fits standard 2-1/2" shop vacuum hose extensions
-
Fits on standard 2-1/2" shop vacuum hoses.
-
